Use Mustard Before Dry Rub?

The other day, I was thinking about something. Why do some people slather a coat of mustard on their meats before applying the dry rub? Is it simply a method of improving the way the dry rub sticks to the meat, or does the mustard itself impart some type of flavor? Why not use something else, like olive oil, hot sauce, BBQ sauce, or heck, how about some maple syrup?

I did some research online, reading forums and articles, and the opinions are widely varied. Some are firm believers of the mustard coat, because it improves the hardening of the bark after such a long period of smoking the meat. The general consensus is that most people use mustard so that the rub adheres to the meat (which I’ve never had a problem with before). Mostly everyone said that you can’t even taste the mustard when the meat is done.

Mustard rubbed 6-lb brisket

Well there’s only one way to settle things, and it’s to see for myself. Many people I’ve seen on television only use mustard for pork butt/shoulder and spare/baby back ribs. Since all I have is a brisket, I decided to use that as my guinea pig (or cow, har har). I just took some plain organic yellow mustard that I had in the fridge and slathered it all over on both sides.

Then, I used a slight variation of my Dirty Smoke dry rub:

- Grounded black pepper (heavy)
- Seasoned salt
- Granulated garlic
- Paprika
- Cayenne pepper (very little)
- Cumin (very little)
- White granulated sugar
- Brown sugar

I put the dry rub on the top of the mustard-covered brisket, and honestly couldn’t tell much of a difference if there was no mustard. The seasonings stuck onto the meat just fine. I wrapped it up in foil and it’s in the fridge for now, waiting to be smoked. To be continued…

Dry Brisket Lesson Learned

I hope everyone had a fantastic, safe, and BBQ-filled Independence day weekend. I spent the majority of my time eating a smorgasbord — smoked brisket, smoked chicken, hot links, corn, potato salad, etc. I needed a nap after every meal. There were plenty of leftovers, that’s for sure. The chicken turned out awesome, extremely moist and flavorful, with just enough of that smoky apple wood flavor. Dare I say — could it even be competition worthy? The brisket was an entirely different story. But there was one critical mistake I made before firing up the WSM.

For this smoke-out, I bought a 6 lb brisket at Costco and a 6-pack of bone-in chicken breasts. It was essentially the exact purchase from my previous experience. But there was one huge difference — The brisket was not in sealed cryovac packaging like this. Instead, it was simply plastic wrapped like all the other meats –  with the styrofoam plate on the bottom with tightly sealed plastic wrap all over.

Turns out, I made a rookie mistake. Here is an excerpt from Virtual Weber Bullet:

Avoid small, super-trimmed brisket flats with the point removed. They may be advertised as “first cut”, “nose off”, or “cap removed”. These are fine for braising in the oven, but are hard to barbecue without drying them out. If this is all that’s available to you, a layer of bacon placed on top may help to keep the meat moist during cooking.

No wonder. I thought that the brisket was missing something when I unwrapped it — the entire cap, which contains a lot of fat, was completely missing. The fat helps keep the brisket moist through the hours of low and slow smoking. So how did my brisket turn out? You guessed it. It was dry. So I had to slather the brisket with plenty of BBQ sauce. Lesson learned.

Spare Me Some Spare Ribs

Having the WSM is a little addicting. It had been more than a week since the last smoke-out and I was already getting the itch. So over the weekend while grocery shopping, I picked up a “family pack” of pork spare ribs at a local grocery store for a little under $7. It was perfect because I didn’t want to buy a Godzilla-sized pack at Costco that would probably feed a small hungry village in some 3rd world country.

I slapped on some homemade rub and put it in the fridge overnight. The rub I’ve been using has been working pretty well. It’s simple and gets the job done. I posted the recipe I used in the past, but this time around I added a pinch of cumin and a little brown sugar for some extra caramelization.

The next day, I threw it on the WSM and basted the ribs with apple juice on each side after a couple of hours. The grand total smoke time was 4.5 hours. This time around, I experimented by NOT adding any water into the water pan. As you know, the purpose of the water pan is to regulate the internal temperature and to keep it low and slow. With no water, you run the risk of higher temperature, so you have to adjust the vents and monitor very carefully. On the flip side, you can achieve better results on the bark — the outside crust of the meat. See for yourself at the jump.

What a beauty. I slathered on some BBQ sauce and my wife and I tore into it like ravaging vultures. While eating, I tried to judge the ribs as if it were a competition. I liked the fact that the meat wasn’t completely “fall-off-the-bone” tender but still had a good bite to it. It had a nice, pink color on the inside. I loved the outside bark. If I had to nitpick, I would say that it was slightly on the overcooked side. It wasn’t quite as juicy and tender as I had hoped. I can attribute this to the higher temperature (consistently around 250+, instead of the 225 range) from not having water in the pan. But overall, a good learning experience my first time smoking ribs.

My First Time Smokin’ Brisket

Shhh… BBQ R2D2 (my nickname for the WSM) is sleeping. Smoking away, undisturbed, at a steady 225 degrees F. My first attempt at smoking brisket is now underway. But it’s only been a couple of hours, and the anticipation is already killing me. How do all the seasoned BBQ veterans do it? Especially, when you’re hungry, and the smell of smoked meat permeates through the air?

Since I’m using this blog to document/log my BBQ smoking experiences, I’ll simply be posting my thoughts and pictures with every experience — even the mess-ups. For my first time using the WSM, I’m using 6-lb brisket and 3 large bone-in half chicken breasts. Read more >>

• 6-lb USDA choice brisket – about $21 at Costco. There was about 4 or 5 other ones, ranging from $18-26. I tried to pick one that wasn’t too big, even shaped with a little layer of fat, and just felt “right” squeezing it. It’s like picking fruit or vegetables… call it a hunch.
• 6 bone-in half chicken breasts – about $11 at Costco. I just picked the cheapest one.

I bought the meats the day before, so I had time to trim the fat from the brisket, put the dry rub seasonings, and put it in the fridge overnight. One thing’s for sure, trimming fat is a good test to see how sharp your knife is. Mine wasn’t quite as sharp, so I had a tougher time cutting away some of the fat. So you can see it wasn’t the cleanest butchering job.

BEFORE: Brisket right out of the packaging, pat dry

AFTER: trimming some of the fat off, albeit unevenly

Not much fat on the other side, leave as is

With dry-rub seasoning massaged in

The dry rub was nothing fancy, I just used whatever I had in my pantry:

• Seasoned salt
• Ground black pepper
• Garlic powder
• Mustard powder
• Onion powder
• Cayenne pepper
• Old Bay seasoning

I just sprinkled a little bit of each on the meat and gave it a good rub-down. It gave a nice, dark red coating and smelled pretty good already. I know Old Bay is more commonly used for seafood, but I thought, hey why not sprinkle a little for BBQ and see how it turns out.

The next day, I was ready to put the WSM to work. I fired up the chimney starter filled with briquets directly on the bottom grate of the charcoal bowl and waited about 15 minutes for the flames to start showing up on the top layer of the briquets with a little bit of white ash color. Then I dumped everything on the grate, and placed 5 small chunks of apple wood directly on the flaming charcoal.

Almost ready to be dumped out

I probably put in the wood a bit too early

From there, I quickly assembled the WSM by putting the middle section, then the water pan. I lagged just enough, that when I poured water into the water pan, it “flashed” and steamed water just a bit, but I managed to carefully pour all of the water without spilling it onto the charcoal below. I placed the first grate, slapped the brisket on it, then the second grate with the 3 chicken breasts.

Brisket on the grill, fat side up

Chicken breasts

I put the lid on, and voila, I was done. The only thing left to do is monitor the temperature. It quickly rose to about 300 degrees F, but has now settled to around 225 degrees F. I couldn’t help but fiddle around with the bottom vents. For now, I settled on this — bottom 3 vents are halfway closed, and the top vent is open. For about a 6-lb brisket, I plan on smoking it for about 8-9 hours (following the 1.5 hour per pound guideline), so we’ll see how it turns out. Obviously, I won’t be smoking the chicken that long. Stay tuned for the after pictures and taste tasting. For now, it’s just waiting…